AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE
– [email protected] – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 -
Capital : 500 000,00 €
Fichier :
AT-07
tablet
user
guide20190423_AT-
07_user_guide AT-07 tablet
Version : V1.0
20/46
Close the tester
Under standby interface and there is electricity in the battery, long press the power key to pop up an
option menu and then choose "Power Off" to close the tester.
3.2.2
Standby and Wake up
Under the "on" condition, the system will enter into standby state or shortly press on/off key to enter
into standby state. Under standby condition, shortly press on/off key to wake up the system. (The
time entering into standby is relevant with the backlight time setting in setup options. If the setting is
"Light Forever", the system will not standby automatically. But you still can realize the standby by
pressing on/off key.)
After waking up, the system will restore to the interface before the standby and the program will
restore to the state before the standby.
3.2.3
Table Management
There are five default pages of the table screen and it can display different screens by sliding with
finger.
Lock or Unlock
If there is no equipment operation, after some time the keypad will automatically locked. Press the
power button to wake up the screen, click the lock icon, you can slide in different directions
respectively, into different functional, as shown below:
In main menu "Settings> Display> Sleep" can set time delay before the device sleep.
