AxelTech Falcon D7, Руководство пользователя, Страница: 65 / 226

65
MENU | AUDIO INPUT
FALCON · User Manual · ENG
AUDIO INPUT
5.2.1 SOURCES
COMPLETE SET OF INPUTS, Extended Changeover/Silence Detector with configurable source priorities out of 11
sources: 1xAnalog, 2xAES/EBU, 2xIP, 2xMPX, 1xAES192, 1xDante
* , 1xMPX over Dante, 1xInternal Player * .
In this section, you can define parameters connected with (analogic, digital, multimedia and mpx decoder). The
changeover can choose between one of the following sources.
5.2.1.1 ANALOG
Sensitivity: sensitivity of the input level. (In example: if a signal of -6.00 dBu arrives, this parameter has to be
set on -6.00 dBu).
Mode:
Stereo: the sound is reproduced in his both left and right channels.
Mono: the sound is reproduced only in one channel in monophonic way.
Mono-Left: the left channel of the input signal is reproduced in monophonic way.
Mono-Right: the right channel of the input signal is reproduced in monophonic way.
Swap Left-Right: the left and right channels are swapped. The left becomes the right, and the right becomes
the left. The sound is reproduced in stereophonic way.
Inv Left: the sound is reproduced in stereophonic way, but the phase of the left channel is inverted.
Inv Right: the sound is reproduced in stereophonic way, but the phase of the right channel is inverted.
Input Clipping Point: moves the clipping point level. If Sensitivity ≤ 9 we suggest keeping the Input Clipping
Point=+15 dBu. If Sensitivity > 9 we suggest keeping the Input Clipping Point=+24 dBu.
AGC
This setting helps balance the audio level. Some of the analogue conventional and trunked radio systems do not
include components with AGC Automatic Gain Control to help normalize the audio levels of analogue transmissions in
the system. This can result in a low-level audio signal if a user on the system is not speaking close enough to their radio
microphone.
AGC Speed: gain speed of action.
AGC Absolite Range: this parameter rules the maximum gain to apply on the received signal.