AXE MICROPROCESS PANEL CONTROLLER METER (Pushwhell Switch)
MMX-AP series
■
Features
◎
Measuring DCA/DCV/ACA/ACV/Potentiometer/Pt-100/
Transmitter/Load Cell/Resistor….etc
◎
3 Alarm function
◎
Display average can be modified(1~99)
◎
Accuracy 0.1% F.S.±1 digit
◎
0.4” LED highlight display
◎
Display range -19999~19999 can be modified
◎
Man-machine interface ,easy to operate
◎
Pushwheel digit switches alarm setting,0~99999 or ±9999
◎
EEPROM Saving, data safekeeping about 10 years
◎
Decimal point can be modified
◎
Modified inside parameter, must have pass code
◎
Display value can Max. hold function
■
Name Of Parts
■
Alarm Function Diagram
◎
ACT=HI
≧
˙Indication
setting
(alarm lamp and relay on)
˙Indication<setting
(alarm lamp and relay off)
◎
ACT=LO
Indication<setting
(alarm lamp and relay on)
≧
˙Indication
setting
(alarm lamp and relay off)
Key Introduce
Operation Manual
Key Function
1.In normal display, The key function is call out setting group
2.In parameter setting page, The key function is data Enter , and goto next page
Key Function
Into parameter setting page, the parameter mark&data is alternate display, If need modify data can
press shift key into setting procedure, The display is lock parameter data, this time must let off key
about 0.2 sec, press again, the cursor(twinkle express)is cycle moving left. (Key Response about
0.2 sec)
8 8 8 8
8
8 8 8 8
8
HI SET
LO SET
HI
LO
GO
FUN
Alarm indicate
Function
indicate
(AZ/HOLD/MAX)
Display
Cursor shift
Parameter ENTER
(Function call out)
Set-value up(Display adjustment call out)
Set-value down
AL1 VALUE
AL2 VALUE
INPUT
HI set value
Lo set value
Hysteresis
(ACT=HI)
Hysteresis
(ACT=Lo)
HI Comparative
output
Lo comparative
output
’
(-+tart band)
-start band
Input=Zero
-input limit
Lo relay output
’
(-start band)
+start band
Symmetrical
+start
band
Decided of DEL and SDT
Not active range
Not active range
ON
OFF
