SVET
ELEKTRONIKE 1
Weekend VHF/UHF radio
5KIT0036
5KIT0042 and 5KIT0043
5ELU0005
There are three basic producs:
KIT all components (code 5KIT0036) contains:
»
All components that are to be soldered on the PCB
»
Double sided PCB
»
Nokia 5510 LCD, RGB LED & Red LED
»
Preprogrammed ATmega328 DIP
»
Rotary encoder
»
Potentiometer
»
2 buttons
»
Speaker
»
All wires
»
Connectors:
◊
BNC for antenna
◊
4-pole microphone connector
◊
3.5 mm jack for external speaker
◊
DRA818 (VHF or UHF, depending from the ordered
KIT)
KIT VHF PCB (code 5KIT0042) contains:
»
DRA818V
»
PCB_VER 5.11
KIT UHF PCB (code 5KIT0043) contains:
»
DRA818U
»
PCB_VER 5.11
The KIT all components (code 5KIT0036) includes all
wires needed to wire your components and make coils. In
the KIT you will see:
»
1 m of 2 wire red/black cable
»
20 cm of 10 wire flat cable
»
15 cm of coaxial microphone cable
»
26cm of 0.8 mm CuL copper wire
Use red/black cable for powering your Weekend radio
station. Place rubber sleve to predrilled hole on the back
side of enclosure and insert cca. 10 cm of red/black cable
in it. Connect red/black cable to +12V & GND terminals
on the PCB
Cut flat cable to 15 cm lenght (to half), take 7 wires and
use them to connect Nokia 5510 LCD.
Weekend VHF/UHF radio
Assembly instruction
Thank you for purchasing Weekend VHF/UHF radio!
