AWT PIM-P, Руководство пользователя, Страница: 90 / 110

11-3
PIM-P Analyzer User’s Manual
Copyright AWT-Global, LLC. All rights reserved.
11.2 Specifications (Data Sheet)
Transmitter Specification 11.2.1
Carrier Power Adjustable Level +20 to + 44 dBm
Carrier Power Resolution / Accuracy 0.25 dB / ±0.35 dB
Frequency Range see version table
Frequency Increment 100 kHz
Frequency Accuracy (typical) 1 ppm
Frequency Tuning Lock Time (typical) 1 ms
Reverse Power Protection
(Include ON/OFF Function) 43 dBm / 5 sec
Receiver Specifications 11.2.2
Reverse IM -122 dBm / -165 dBc
Accuracy ±0.35 dB
Average Noise Floor -140 dBm (300Hz filter)
Dynamic Range (typical)
(reference -90 dBm) 96 dB
Measurement Interval 100 to 350 ms
Effective IF Bandwidth
(Operator selectable) 300, 600, 1.2k, 2.4k, 5k,
10k, 12k, 15k, 25k, 50kHz
Operational Input Power - 36 dBm RMS
Input Power without damage - 15 dBm max
Warm-Up Time for specified accuracy 5 minutes
System Specifications 11.2.3
RF Connector DIN 7-16
(3) USB ports
LAN port
REF Out 10MHz
User Interface Display 10.2” (WIDE) TFT with touch screen display
IM Measurement Alarms Audio / visual
Operating Voltage 110 to 240 V (50-60 Hz)
Power requirements 750 VA max
Environmental 11.2.4
Ingress Protection: IP67 (with Lid closed), IP20 (with Lid open)
Mechanical shock: 40G shock rating
Operating Temperature range: -10° to 40°C (14° to 104°F)
Storage Temperature range: -20° to 60°C (-4° to 140°F)
Humidity (non-condensing): 5% to 95% RH
Max Altitude: 2000 Meters / 6560 ft.