AWS AIRBAR, Руководство оператора

Страница: 16 / 20

A WS AirBar Operator’s Manual
12
PTO SHAFT
Location A
– 4-6 Pumps (15 grams)
Location B – 2-3 Pumps (6 grams)
Location C* – 4-6 Pumps (15 grams)
*Note
– Pull PTO shaft apart & apply grease to inner profile.
BEARINGS
The (4) shaft bearings are the only grease points on the main
chassis, (2) on each side.
On some 35’ and 45’ systems (equipped with an extended
driveline), there is an additional bearing that requires greasing.
NOZZLE INSPECTION
Opening
It is critical that the nozzle opening be set to 3/8”. They can
become collapsed or opened during use from contact with rocks
and other debris and wear.
To check & set the opening, a 3/8” bolt can be used. To set the
opening, insert the bolt and pinch using pliers as shown.
U-Bolt
Vibrations from normal use can cause the gasket between the
nozzle yoke & manifold to take a set, reducing tension in the U-
bolt. Check tightness of U-bolt nuts periodically using a 7/16
wrench or deep socket.
3/8”