AWH Tanko RT, Руководство по эксплуатации и установке, Страница: 105 / 132

ATEX Retractor System TANKO-RT/-RTS
7 Maintenance Translation - Operating/installation instructions 2020/01 95/121
Figure 7.4-4: Assembly Tools, Assembly cone (A) and Assembly Anvil (B)
All the screw connections on the device are tightened to the appropriate tightening torque in the factory
in order to ensure the necessary clamping force between the components that need to be connected,
even when the maximum operating forces are applied.
All the relevant tightening torque valued for the screw connections are listed in
Section 7.5 Spare Parts and Customer Service in Table 7.5-1 .
7.4.3 Replacing the O-rings, the central bearing, the piston ring and the
damping ring
The tools required for assembly/disassembly work are listed in Section 7.4.2 Tools and
Tightening Torques .
The item numbers shown in brackets refer to Figure 7.5-1: Internal Construction .
Table 7.5-1 includes a list of spare parts.
B
A