AWH TANKO JM100 Скачать руководство пользователя страница 62

Страница: 62 / 104

Jet Cleaner TANKO-JM

52/90

Translation of the original Operating / Installation Instructions 2016/12

7 Maintenance

Interface C

NOTE

Excessively small installation openings on the container or components (e.g. agitators) in the

container! Nozzles collide during removal!
Damage to the device. The nozzle carrier may come loose.



The nozzles must NOT collide!

1. Check the following before lifting the device out of the container:

–

The minimum dimension for the installation opening (see

section 3.3

Technical Data

) and

–

Presence of interfering contours on surrounding components in the container.

2. Lift the device (downpipe [DP] with cleaning head) out of the container through the installation

opening with the utmost care

NOTE

“

Installation opening

–

Stationary device

”

Before removal, align the position of the nozzles if

necessary by rotating the cleaning head/nozzles.



Or loosen the cleaning head/device inside the container from the downpipe [DP].

–

Provided that proper assembly/disassembly of the cleaning head/device inside the container is
assured.

7.4

Maintenance

To ensure the trouble-free operation, high operational safety and long service life of the cleaning device,
it is imperative to have it cleaned and maintained at regular intervals.

We recommend that you document the maintenance work in a report.

The safety notes in

section 7.1 Safety Notes for

Maintenance

must be adhered to when carrying out

cleaning, maintenance and repair work.

Содержание TANKO JM100









































































































Результаты поиска

Содержание TANKO JM100

Отзывы:

AWH TANKO JM100, Руководство по эксплуатации и установке, Страница: 62 / 104

Результаты поиска

Содержание TANKO JM100

Отзывы: