AWH TANKO JM100, Руководство по эксплуатации и установке, Страница: 45 / 104

Jet Cleaner TANKO-JM
5 Installation Translation of the original Operating / Installation Instructions 2016/12 35/90
A Actuator / Energy Supply
Media connection [MC] ]
(connection of the downpipe [DP] to the device)
B Device / Container
Process connection [PC] ]
(connection of the downpipe [DP] to the container)
C Space for Movement / Installation Space
Cleaning head with nozzles
(space for orbital nozzle movement and outlet of
cleaning agent)
Figure 5.2-6: Interfaces of the JM800 device
5.2.2 Installation Position
1) Aligned vertically with the cleaning head pointing downwards (standard):
The device is designed for vertical installation as the preferred position. This installation position means
that the device can drain automatically.
2) Different installation position from the standard:
A different installation position to the standard position means that the device may NOT always be able
to drain automatically. The strain on the bearings is also increased.
Adhere to the following:
– The running performance may be compromised.
–
The service life of the bearing elements may be shortened as a result of the increased strain.
– Maintenance intervals should be shortened if necessary (see section 7.4.1 Maintenance Intervals ).
5.2.3 Installing the Device
Installation Opening of the Container
The use of the device (mobile or stationary) is the decisive factor for the required size of the installation
opening. The specified installation dimensions in
Table 3.3-1: Operating parameters of the device are