manualshive.com logo in svg

AWE MHUB4K431, Руководство пользователя, Страница: 5 / 13

Поделиться
Скачать
AWE MHUB4K431 Скачать руководство пользователя страница 5

MHUB 4K (4x3+1) Manual 

5

DISPLAY RECEIVERS (X4)

1.  Power LED

:  This LED indicates that the receiver has a PoE connection with the matrix

2.  “HDBASET”

: Connects back to the HDBaseT output on the MHUB chassis

3.  “HDMI OUT”

: Connect this to your local display using a HDMI cable

4.  “IR (IN)” and “IR (OUT)”

:  Connect an IR RX to the ‘IR (IN)” port to send IR commands back to the MHUB 

chassis,  Connect an IR TX to the “IR (OUT)” port to enable control of your display

IR (IN)

HDMI out

IR (OUT)

HDBASET

4

3

1

2

SETTING UP IR CONTROL 

This will enable backwards IR control (the most common form of IR control) where IR signals from a remote in 
any one of your rooms is sent back to the splitter and sent to your source device to make it appear as though it 
is in the same room as you.

SOURCE CONTROL VIA IR (BACKWARDS IR) FOR OUTPUTS A, B & C

1.  Plug IR transmitter TX into the numbered 3.5mm jack port labelled SOURCE IR (OUT) on the MHUB 4K 4x4 

hub . Make sure the number corresponds with the HDMI input the source device is connected to.

2.  Place IR transmitter TX bud (small rectangular part) in front of the IR eye of the source (where you would 

normally point the remote to control the HDMI source device). Repeat these steps for each source device.

3.  Plug IR receiver RX into the 3.5mm jack port labelled IR RX on the display receiver.
4.  Place IR receiver at or near the display (position it close to  where you would usually point your remote to 

turn your TV on or off).

Содержание MHUB4K431














Отзывы:

Нет отзывов