AWE MHUB4K431 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 13

AWE MHUB4K431 Скачать руководство пользователя страница 3

MHUB 4K (4x3+1) Manual

3

QUICK SETUP

SYSTEM FEATURES

If you have installed an MHUB or other HDanywhere device before, this quick start guide will get you up and
running in the fastest time possible. If you have not installed one of our systems, we would recommend reading
the rest of this manual.

1.

Power off all displays and your HDMI source

devices.

2. Connect your HDMI sources to the HDMI

inputs on the central hub using appropriate
HDMI cables.

3. Connect a display such as a HDTV or HD Pro-

jector to the HDMI output port on the display
receiver using a HDMI cable for outputs A, B &
C* . For output D connect a HDMI cable to the
HDMI output on the MHUB to your HDTV.

4. Now connect a single Cat5e/6 up to 70m in

length between the Cat output port of the ma-
trix and the cat input port of each of the three
display receivers.

1. Uses single CAT-5e/6 or HDMI cable to send

uncompressed video and audio over long dis-
tances from upto four source devices to upto
four Displays

2. Supported video resolutions:

720p, 1080i ,3D

1080i (50Hz), 1080p (30Hz) , 1080p (60Hz) ,
4K (30Hz) 4:4:4, 4K (60Hz) 4:2:0 , UHD (30Hz)
4:4:4, UHD (30Hz) 4:4:4

3. Supported stereo or multichannel audio

formats including:

Dolby Digital 2.0, Dolby

Digital 5.1, Dolby Digital EX 6.1, Dolby Digital
Plus 7.1, Dolby TrueHD 5.1, Dolby TrueHD
7.1, DTS 5.1, DTS-HD Master 5.1, DTS-HD
Master 7.1, DTS 96/24 5.1, DTS-ES Discrete
6.1, DTS-ES Matrix 6.1, LPCM 2.0, LPCM 5.1,
LPCM 6.1, LPCM 7.1, PCM 2.0,

Dolby Atmos -

To be tested.

5. Plug in the power for the central hub.

6. Power on your HDMI source devices followed

by each display.

7. At this point the four displays should show the

video and audio of the HDMI source devices
connected to the matrix.

*We recommend that you use high-speed HDMI
cables no longer than 5 meters in length.

4. Two-way IR supported on outputs A, B & C

5. IR passback allows you to select and control

what you watch from every room

6. Control is delivered via two-way RS232, TCP/

IP, IR and front panel buttons.

7. Stereo and Digital audio breakout on output D

via twin RCA connectors for stereo or Optical
SPDIF for surround sound formats.

8. Multichannel to stereo downmix on the twin

RCA connectors

9. AVR IR for integrating IR control for an AVR in

addition to 4 source devices.

«
1
2
3
4
5
...
»

Содержание MHUB4K431














Отзывы:

Нет отзывов