Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE/Secor Ltd. All rights reserved. Rev3.7
It is crucial to install each section and exhaust
band clamps correctly to prevent loose joints,
exhaust leaks and rattles.
Arrow A
shows the expanded pipe and the
preinstalled exhaust clamp being brought up to
the corresponding pipe.
Arrow B
shows the overlapping pipe installed
correctly over the corresponding pipe.
Arrow C
shows the exhaust band clamp being
brought to the edge of the expanded pipe.
NOTES:
•
Do not
fully torque any exhaust
clamp until the entire exhaust has
been installed and adjusted.
•
Torque specification is a
minimum
of
60 ft/lbs
Install your AWE driver side differential pipe
(
D90
),
with the supplied Accu
-
Seal clamp, as
shown in
Figure 10
.