Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE/Secor Ltd. All rights reserved. Rev3.7
AWE Track System
ONLY
.
Install your AWE Track rear assembly (
D95
),
with the supplied Accu
-
Seal clamps and OE
hangers, onto the AWE differential pipes, as
shown in
Figure 19.
NOTE:
Wait to install exhaust tips, until later in
your installation.
Reinstall the OE rear hangers, as shown in
Figure 20
, on both the driver and passenger
side.
For the rear sections, hanger bar collar clamps
are provided to prevent side to side movement
of the exhaust system. After sliding the exhaust
hanger bar through the OEM grommet, install
the collar clamp on the outside end of the bar
as shown in
Figure 21
.