AVYCON AVR HT Series Скачать руководство пользователя страница 88

Страница: 88 / 135

Alarm Management

9.5.4 Buzzer

Click Start



Settings



Alarm



Event Notiﬁcation



Buzzer to go to the buzzer

conﬁguration interface. Set the delay time of the buzzer and then click “Apply”

to save the setting. You can click “Test” to test the buzzer.

9.5.5 Push Message

Click Start



Settings



Alarm



Event Notiﬁcation



Push Message to go to the

interface as shown below. Check “Enable”, choose the push schedule and then

click the “Apply” button to save the settings. If Push Server is online, it will push

messages to the mobile clients.

9.5.6 Alarm Server

Go to Alarm



Alarm Server interface as shown below.

Enable the alarm server and enter server address and port of the alarm server.

Then select protocol. If “Send Heartbeat” is enabled, set the interval times. After

that, test the effectiveness of the alarm server. Having tested successfully,

please click “Apply”. When an alarm occurs, the device will transfer the alarm

event to the alarm server. If an alarm server is not needed, there is no need to

conﬁgure this section.

Содержание AVR HT Series








































































































































Результаты поиска

Содержание AVR HT Series

Отзывы:

AVYCON AVR HT Series, Руководство пользователя, Страница: 88 / 135

Результаты поиска

Содержание AVR HT Series

Отзывы: