AVYCON AVR HT Series Скачать руководство пользователя страница 28

Страница: 28 / 135

Icon / Button

Meaning

It shows the current login user.

Click it to go to record search interface, see 8.4 Record Search,

Playback & Backup

for details.

Click it to go to playback interface (click on the tool bar at the

bottom of the live view interface to set the default playback time),

see 8.2 Playback Interface Introduction for details.

Click it to pop up the setup panel, see 3.2.2 Setup Panel for details.

Click it to log out the system.

Click it and then select “Logout”, “Reboot” or “Shutdown” in the

popup window.

Introduction of area

③

Click Start



Settings to bring up the setup panel as shown below.

The setup panel includes seven modules. Each module provides some function

entries with links for convenient operation.

Wizard & Main Interface

3.2.2 Setup Panel

Содержание AVR HT Series








































































































































Результаты поиска

Содержание AVR HT Series

Отзывы:

AVYCON AVR HT Series, Руководство пользователя, Страница: 28 / 135

Результаты поиска

Содержание AVR HT Series

Отзывы: