AVYCON AVR HT Series Скачать руководство пользователя страница 25

Страница: 25 / 135

Tips:

Please skip Step

⑦

and

⑧

if the DVR do not support RAID function.

Manual

Set the “Sensor Record”, “Motion Record” and “Schedule Record” of

each camera. Click “Next” to save the settings. See 7.1.1 Mode Conﬁguration

for

details.

Wizard & Main Interface

⑦

⑧

⑨

Disk Mode.

Click “Enable RAID” to enable the RAID function. Click “Next” to

continue.

Create an array.

Set the array name and select array type which including

RAID0, RAID1, RAID5, RAID6 and RAID10. The global hot spares and array

capacity can also be viewed here. See 7.4 Disk

for details. Click “Next” to

continue.

Record Settings.

Two record modes are available: auto and manual.

Auto

Select one auto mode in the interface as shown below and then click “OK”

button to save the settings. See

7.1.1 Mode Conﬁguration

for details.

Содержание AVR HT Series








































































































































Результаты поиска

Содержание AVR HT Series

Отзывы:

AVYCON AVR HT Series, Руководство пользователя, Страница: 25 / 135

Результаты поиска

Содержание AVR HT Series

Отзывы: