Avtek Video PRO 200, Руководство пользователя

Страница: 3 / 12

Manual Screen
User Manual
The screen can be wall mounted or ceiling mounted , users can choose the
mounting method according to their needs. Whichever method of mounting
is used, insure the right equipment is used.
For wall mounting or ceiling mounting on a wooden surface use ø4x50mm
wood screws.
For mounting on a brick, concrete or plaster surface use ø6x50mm screws
with screw anchors or wall plugs.
Ceiling Mounting:
Install the U-bolts first and then measure the distance between U-bolts, drill
holes for screw hooks the same distance apart, making sure the holes are in
line with each other and parallel with the wall.
Screw the appropriate screw hooks into the holes and hang the screen by
the U-bolts.
Ceiling mounting method (way 1)
Measure the distance from the holes in the end caps top surface, mark out
the same distance on the ceiling and drill holes for the screws, making sure
the holes are level. Screw an appropriate screw into each hole, hang the
screen from the screws with the holes in the end caps.
Ceiling mounting method (way2)
Install the screen so that when fully extended the audience can see the
whole screen.
Measure the distance from the holes in the wall mounting brackets, mark
out the same distance on the wall and drill holes for the screws, making
sure the holes are level. Screw an appropriate screw into each hole, hang
the screen from the screws with the holes in the brackets. Check the screen
is evenly spaced from the wall with a ruler. (Screw appropriate screws into
the two bottom holes to fix the screen if necessary)
Wall mounting method
TO LOWER THE PROJECTION SURFACE:
Pull the projection surface down to the desired length (Fig. 1); Stop for at
least 3 seconds, then allowing the projection surface to retract a small
amount until it locks.
TO RAISE THE PROJECTION SURFACE:
Pulling the projection surface down a small amount will disengage the
locking mechanism. (Fig. 2)
Once the locking mechanism has been disengaged the projection surface
will be pulled back into its case.
Fig. 1
Fig. 2
Installation Method
Screen Operation
Wall Mounting:
3