background image

 

AVTECH Software, Inc. 

Temperature & Environment Monitoring… 

Made Easy!

 

AVTECH.com

 

Extreme Temperature Sensor 

(RMA-ET1-SEN)

Installation Note

Sensor ID Box

2" Probe 

10'  

Thermocouple 

Coil 

AVTECH’s Extreme Temperature Sensor monitors a wide range of 
cold temperatures with a rugged thermocouple and 
smart ID box that communicates readings 
to your Room Alert analog sensor 
(built-in or external). This reliable 
sensor has a range of -328º F to 
32º F (-200º C to 0º C), making                                                                                                                                  
it perfect for your low temperature 
threshold monitoring.

 

 

Extreme Temperature Sensor 
Package Contents 

 

One (1) Extreme Temperature Sensor 

 

One (1) 10' thermocouple coil w/ 2" probe 

 

One (1) 18V power adapter 

 

One (1) 25' speaker wire 

 

Two (2) mounting screws 

 

One (1) Installation Note (You’re reading it now.) 

 

Extreme Temperature Sensor And Power Ports 
 

 

Install Your Extreme Temperature Sensor 

 

Step 1: Locate the thermocouple and mount the sensor. 

Your Extreme Temperature Sensor comes with a 10' thermocouple coil. When you are 
considering the layout of your components, remember that the sensor housing is not designed 
to withstand the same temperatures as the thermocouple.  

Power  

Adapter 

Cord 

Polarized 

Speaker Wire

 

Copper

 

(+) 

 

Silver

 (-) 

Thermocouple 

Coil 

Left Right

Do not use this sensor in hazardous (classified) locations or life safety applications. 

Содержание RMA-ET1-SEN






Отзывы: