AVT MAGIC AC1, Руководство по аппаратному и программному обеспечению

Страница: 40 / 162

PAGE 40
W i n d o w s P C S o f t w a r e
Manual Dialling
Via the entry field for the calling number, you can dial manually instead of us-
ing the telephone book. Depending on the operating mode, one or two fields
are available.
FIG. 12 MANUAL DIALLING
For the entry field, all numeric characters ’
0’...’9’
as well as the characters ’
*
’
and
’#’
are allowed. The length of the calling number must not be more than
20 characters .
With a ’ - ’ placed in front of the calling number (e.g. „-123“) you can temporar-
ily suppress the prefix number for getting an outside line (see also Page 55,
Prefix Number).
Mute microphone
By clicking on the MUTE MICRO button, the microphone connected to the
headset interface is muted.
grey
: Mute function is not active
blinking in red : Mute function is active. Additionally, in the Audio mixer
MUTED is displayed at the microphone level.
Headphones output (Phones Out)
Via the button PHONES OUT you select the Audio signals which you want to
hear at the headphones if connected.
Depending on the configuration of the Audio mixer, the
PHONES OUT
but-
ton can be displayed in the following colours:
grey : No Audio source activated. In this case, nothing could be heard at the
headphones output.
green
: At least one Audio source is activated
blinking in red
: The
Mute
function is enabled. In this case, nothing could be
heard at the headphones output.
Please consider also the further configuration possibilities of the headphones
interface from Page 76, which allow an allocation of the left and right channel.
TIP
You can copy a phone number with <
CTRL
>+<
c
> and paste it with
<
CTRL
>+<
v
>.
NOTE
If the fee-based option Mixer Tool Plug-In (Order number 430201), you can
select only one signal from all sources.