522.011UK User Manual
Lux
Light Sensor Control Lamp Holder
Item ref: 522.011UK
User Manual
Introduction
Thank you for choosing the Primalux Light Control
Sensor Lamp Holder. This lamp holder can help save
energy in many different environments such as; the
home, the workplace and hotels etc.
The lamp holder only allows the light to illuminate
when necessary so that when insufficient light is within
the room the lamp will illuminate.
Installation
•
Whilst installing please ensure that the power is off to avoid any
possible harm.
•
Then fix the holder into the correct fitting (E27) to
the install location.
•
Screw in the E27 fitting and then connect an E27
lamp of your choice to the bottom of the holder.
•
Please ensure that both the lamp holder and the
lamp are screwed in correctly and tightly.
•
Once installed, turn the power back on and check
to ensure the holder functions correctly.
•
Please see the right image for extra assistance on
installation.
