953.053UK User Manual
Introduction
Thank you for choosing an Adastra DM-8 digital messaging unit for scheduled music, announcements, and alerts in your
public address system. This unit is designed to provide flexible and hassle-free automation of audio playback, all fully
programmable by the operator.
Please read this manual to gain the best results from your product and avoid damage through misuse.
SAFETY SYMBOL AND MESSAGE CONVENTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE
PAS OUVRIR
This symbol indicates that dangerous voltage constituting a risk of electric
shock is present within this unit
This symbol indicates that there are important operating and maintenance
instructions in the literature accompanying this unit.
SAFETY NOTICE
1.
Prior to use, read through this manual
2.
Keep the manual in good condition
3.
Pay attention to safety warnings
4.
Observe all operating requirements
5.
Do not use the device near water or wet areas
6.
For cleaning, only use a lint-free, dry cloth
7.
Install according to the specifications
8.
Place away from heat sources or heating appliances
9.
Use mains lead provided and avoid damage to cable or connectors
10.
Unplug power from mains during stormy weather or if unused for long periods
11.
In case of malfunction, water ingress or other damage, consult qualified service personnel
12.
Do not place in damp areas or near liquids or moisture. Do not spill liquids on the housing
13.
Please pay attention to warning symbols during transit and placement
14.
Ensure that the apparatus is connected to a mains socket with a protective EARTH connection
15.
Ensure correct operation of the mains switch
Warning
To prevent the risk of fire or electric shock, do not expose any components to rain or moisture.
If liquids are spilled on the casing, stop using immediately, allow unit to dry out and have checked by qualified personnel
before further use. Avoid impact, extreme pressure or heavy vibration to the case
No user serviceable parts inside
–
Do not open the case
–
refer all servicing to qualified service personnel.
Safety
•
Check for correct mains voltage and condition of IEC lead before connecting to power outlet
•
For DC power, use a stable 24Vdc supply connected to the 24Vdc power terminals on the rear panel.
Placement
•
This unit can be used free-standing or fixed into a 19
” rack
.
•
Ensure adequate support and access to controls and connectors when rack-mounting.
Cleaning
•
Use a soft cloth with a neutral detergent to clean the housing as required.
•
Do not use strong solvents for cleaning the unit.
