Avonic CM70-IP, Руководство пользователя, Страница: 69 / 93

APPENDIX C - HTTP API
With the HTTP API you can control the camera by using a web browser like Microsoft Edge or Google Chrome
for example. It is possible to change multiple settings at once using this feature. This document is available as an
Appendix in the CM7x manual and as a separate document that can be downloaded on the
product website .
How to use HTTP API
To use the HTTP API you need the following link:
http://192.168.5.126/ajaxcom?szCmd=
Follow instructions below:
1. Click on the link above, or copy and paste it to your browser.
2. Note that the IP Address in this link is an example of an IP address . Change this IP Address to the
one you use for your camera. See Network > Ethernet > IP Address .
3. Copy the code from the list. Remember that some codes are documented over multiple lines
and that you need to copy this from the first to the last bracket! See the example below:
4. Paste the code at the end of HTTP link. It will look like this:
5. Change the settings in the link. In this case:
6. Press ENTER . If correct, you get in return:
If failed , you get in return.
69