Avonic CM63-IP, Руководство пользователя

Страница: 70 / 80

www.avonic.eu
70
Query Pan Position 0xA0 Address 0x00 0x51 0x00 0x00 0xAF XOR
Query Pan Position
Response
0xA0 Address 0x00 0x59 Value
High Byte
Value Low
Byte
0xAF XOR
Query Tilt Position 0xA0 Address 0x00 0x53 0x00 0x00 0xAF XOR
Query Tilt Position
Response
0xA0 Address 0x00 0x5B Value
High Byte
Value Low
Byte
0xAF XOR
Query Zoom
Position
0xA0 Address 0x00 0x55 0x00 0x00 0xAF XOR
Query Zoom
Position Response
0xA0 Address 0x00 0x5D Value
High Byte
Value Low
Byte
0xAF XOR
VISCA over IP commands
The Avonic CM63-IP camera is implemented with a TCP server. The TCP port number is 5678
by default and can be altered in the WebGUI. Once the connection between client and server
is set up, the client will be able to send PTZ commands to the server. The server then parses
and executes the PTZ command.
The Avonic IP Camera has also implemented a UDP server. The UDP port number is fixed on
1259. Once the connection between client and server is set up, the client will be able to send
PTZ commands to the server. The server then parses and executes the PTZ command.
The VISCA over IP command list is based on the VISCA protocol. Not all VISCA commands