HTTP API CamDirector®
With the HTTP API you can control the CamDirector
®
Teacher Tracker by using a web browser like Microsoft Edge
or Google Chrome for example. It is possible to change multiple settings at once using this feature.
How to use HTTP API
To use the HTTP API you need the following link:
http://192.168.5.50/api?szCmd=
Follow instructions below:
1.
Click on the link above, or copy and paste it to your browser.
2.
Note that the IP Address in this link is an
example of an IP address
. Change this IP Address to the
one you use for your camera. See the WebInterface
Settings/ Status
. Note also that you need the
IP
address of the CD500 (network)
and NOT the addresses of the cameras!
3.
Copy the code from the list. Remember that you need to
copy this from the first to the last bracket!
See the example below (the pictures are the ones from the CM70 API list, but it works still the same):
4.
Paste the code at the end of HTTP link. It will look like this:
5.
Change the settings in the link. In this case:
6.
Press
ENTER
. If
correct,
you get in return:
If
failed
, you get in return.
9
