![Avonic AV-CM44-VCUC-B Скачать руководство пользователя страница 8](http://html1.mh-extra.com/html/avonic/av-cm44-vcuc-b/av-cm44-vcuc-b_user-manual_3033792008.webp)
8
Back to top
Back to top
CAUTION:
The System Select Switch has no function in the AV-CM44-VCUC as all the output resolutions are
dictated by the computer to which it has been connected
Power adapter
This equipment is equipped with a 12V/2A DC power supply. Insert the power supply according to the requi-
rements, turn on the power switch.
Power On
Pan-Tilt will rotate to the maximum position of top right after the camera started, then it returns to the
center, the process of initialization is finished. The camera will show its current IR-channel setting and IP
Address on the osd (Note: If the position preset 0 has been stored, the position preset 0 will be called after
initialization). From this point onwards the user can control the camera with the supplied IR remote control,
Serial control using RS232/RS485 or over IP using Visca over IP
RS232 Interface
System Select Switch