SAFETY INSTRUCTIONS
This chapter contains important safety information regarding the unpacking, installation and use of the camera.
Important Precautions
The Product is NOT intended for use where failure of the device could lead to death, personal injury, or
severe environmental damage.
Be sure that you have COMPLETELY READ and UNDERSTOOD ALL information in this Manual before
unpacking, installing and using this Product. Keep the Manual in a safe place for future reference or
download it from
.
Failure to follow the SAFETY NOTES as described in this chapter could result in fire, electric shock, injury, or
damage to the Product or other property.
Power the Product ONLY with the included cable and power adapter. Other adapters may not meet
applicable safety standards, and could pose a risk of death or injury when connected.
Intended Use
This Product is intended to capture video using HDMI and USB. See also section
on page iv for details.
Handling
To prevent the risk of injury, take the following precautions when handling this Product:
• Handle the Product with care. It is made of metal and plastic and has sensitive electronic components
inside.
• The Product can be damaged if dropped, burned, punctured or crushed, or if it comes into contact with
liquid.
• If you suspect any damage to the Product, discontinue its use, as it may cause overheating or injury.
Installation
To prevent the Product from falling down which may cause injuries:
• Set up this Product on a hard, stable surface.
• Ensure the construction is capable of supporting four times the weight of the Product. (See 'General
Specifications > Weight product’ in the Product Datasheet for the exact weight.)
• Use a safety loop or drop protection that prevents the Product from falling if the construction fails.
• During installation, NEVER install a Product above a person.
• Check the installation at least once a year. An improper construction could cause the unit to fall off,
resulting in personal injury.
9
