Avolites Pearl Expert Titan, Руководство оператора

Страница: 63 / 149

6 . Cues - Page 63
PearlExpertTitan_Man_v2-0.doc 23/09/2009 12:16:00
1> Press the blue PhotoCopy button
2> Press A to select [Move] option
3> Press the Swop button of the cue to be Moved.
4> Press the Swop button of the playback (or the Select/Swop button
of the preset fader) you want to Move it to.
• The ML Menu button keeps the Move mode active, so you can
keep Moving things without having to keep selecting the option.
Press Exit to leave Move mode.
• You can copy multiple cues by holding down the first button of the
range then pressing the last button of the range.
• Option B [Retain Layout] is used when moving multiple cues. If
set to [Bunch up] this option will remove any gaps in the cue
selection.
• D [Swap Items if Required] will attempt to reposition any existing
handles which are in the way of the move. This is useful when
rearranging handles on a page which is nearly full.
6.7 Timing
The Pearl allows a wide variety of timing functions to be set.
6.7.1 Setting fade times and Overlap for a cue
You can set a delay, fade in and fade out time independently for every
cue. Shapes in the cue will also be affected, depending on the fade
mode.
You can delay the fade times between fixtures in a cue so that the cue
is applied sequentially to each fixture. This is called Fixture Overlap and
can create some amazing “peel off” or “roll” type effects with no
programming at all.
In the diagram below, the top picture shows how the LTP channels
change when used with delay, fade and fade out times. The second
picture shows how the HTP channels change. The third and fourth
pictures show what happens to the LTP channels when fixture overlap
and attribute fade are used.