AVOCOR VTF-6500, Руководство по установке и эксплуатации

Страница: 3 / 79

3
Important Safety Instructions

Before using this display, please read this user manual thoroughly to help protect against property damage
and to ensure your personal safety and the safety of others.

Be sure to observe the following instructions.

For your safety, be sure to observe the warnings located in this manual.

For installation or adjustment, please follow the instructions in this manual and refer all servicing to qualified
service personnel.
Safety Precautions

If smoke or a peculiar smell comes from the display, remove the power plug from the outlet immediately.

Failure to do so may result in fire or electrical shock. Contact your dealer for inspection.
 If the display has been turned on but there isn’t a picture, remove the power plug from the outlet immediately.

Failure to do so may result in fire or electrical shock. Contact your dealer for inspection.

If water is spilled or objects are dropped inside the display, remove the power plug from the outlet immediately.

Failure to do so may result in fire or electrical shock. Contact your dealer for inspection.

If the display is dropped or the cabinet is damaged, remove the power plug from the outlet immediately.

Failure to do so may result in fire or electrical shock. Contact your dealer for inspection.
 To turn off the power of the display, press “O” on the main power switch at side of display.

The power standby/on indicator will go off and the display cannot to be turned on/off by using the POWER button
on the remote control. (To turn on/off the display by the remote control, press the main power switch again and
light the power standby/on indicator.)

When turning off the display by pressing the POWER button on the remote control, the main power
of the display is not turned off completely.

To disconnect power completely, remove the power plug from the outlet.

If the power cord or plug is damaged or becomes hot, turn off the main power switch of the display, make
sure the power plug has cooled down and remove the power plug from the outlet.

If the display is still used in this condition, it may cause fire or electrical shock. Contact your dealer for replacement.
Installation

Don't install in a high-temperature environment.

If the display is used in high-temperature or in direct sunlight, it may cause the case or other parts to
become distorted or damaged, resulting in overheating or electrical shock.

Don't install in a high-humidity environment.

This may cause overheating or electrical shock.

Don't install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.

This may cause fire or electrical shock.

Don't overload outlets or cables beyond electrical capacity.

Don't use extension cords as it may cause fire or electrical shock.