AVOCOR AVW-6555 Скачать руководство пользователя | Manualshive

Страница: 3 / 76

background image

Revision Date: 5/31/2019

3

Important Safety Instructions



Before using this display, please read this user manual thoroughly to help protect against property
damage and to ensure your personal safety and the safety of others.



Be sure to observe the following instructions.



For your safety, be sure to observe the warnings located in this manual.



For installation or adjustment, please follow the instructions in this manual and refer all servicing to
qualified service personnel.

Safety Precautions



If smoke or a peculiar smell comes from the display, remove the power plug from the outlet immediately.



Failure to do so may result in fire or electrical shock. Contact your dealer for inspection.



If the display has been turned on but there isn’t a picture, remove the power plug from the outlet

immediately.



Failure to do so may result in fire or electrical shock. Contact your dealer for inspection.



If water is spilled or objects are dropped inside the display, remove the power plug from the outlet
immediately.



Failure to do so may result in fire or electrical shock. Contact your dealer for inspection.



If the display is dropped or the cabinet is damaged, remove the power plug from the outlet immediately.



Failure to do so may result in fire or electrical shock. Contact your dealer for inspection.



To turn off the power o

f the display, press “O” on the main power switch at side of display.



The power standby/on indicator will go off and the display cannot to be turned on/off by using the
POWER button on the remote control. (To turn on/off the display by the remote control, press the main
power switch again and light the power standby/on indicator.)

◆

When turning off the display by pressing the POWER button on the remote control, the main
power of the display is not turned off completely.

◆

To disconnect power completely, remove the power plug from the outlet.



If the power cord or plug is damaged or becomes hot, turn off the main power switch of the display,
make sure the power plug has cooled down and remove the power plug from the outlet.



If the display is still used in this condition, it may cause fire or electrical shock. Contact your dealer for
replacement.

«
1
2
3
4
5
...
»

Содержание AVW-6555













































































Отзывы:

Нет отзывов

Похожие инструкции для AVW-6555

Бренд: GE Страницы: 24

Corometrics 250cx Series

Бренд: GE Страницы: 250

Бренд: Yamaha Страницы: 20

SyncMaster 1200NF

Бренд: Samsung Страницы: 30

SyncMaster 172W

Бренд: Samsung Страницы: 45

SyncMaster 2032GWPlus

Бренд: Samsung Страницы: 62

SyncMaster 2033SN

Бренд: Samsung Страницы: 91

SyncMaster 1100MB

Бренд: Samsung Страницы: 62

SyncMaster 171B, 171S, 181B, 171T, 171Q

Бренд: Samsung Страницы: 83

SyncMaster SM320MX-2

Бренд: Samsung Страницы: 109

T200HD - SyncMaster - 20" LCD Monitor

Бренд: Samsung Страницы: 27

SyncMaster TC180

Бренд: Samsung Страницы: 2

T220HD - SyncMaster - 22" LCD Monitor

Бренд: Samsung Страницы: 88

Бренд: Samsung Страницы: 241

SyncMaster XL2270

Бренд: Samsung Страницы: 43

SyncMaster S24A460B

Бренд: Samsung Страницы: 44

SyncMaster S22A300N

Бренд: Samsung Страницы: 48

SyncMaster S27A850D

Бренд: Samsung Страницы: 89

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды