AVOCOR AVF-8650, Инструкция по установке и эксплуатации

Страница: 39 / 76

Revision Date: 1/17/2020
39
Display Settings
This menu is used for making general display settings.
Input Source
Select the main input source
Options: VGA; DisplayPort; HDMI1~4; OPS; WPS
Default: HDMI 1
Aspect Ratio
Select aspect ratio
Press

or

to select the aspect ratio, and then press OK.
Range: 16:9; 4:3; Auto; Point To Point; Letterbox
Default: 16:9
OverScan
Adjust the overscan of the image.
Press

or

to select the desired level, and then press OK.
Range: 0% ~ 10%; Default: 0%
Auto Scan
Select whether the display will automatically scan for a main input source
Options: On, Off; Default: Off
Source Renaming
Rename the input source.
Press OK to select the input source you want to rename. Using ▲ or ▼ to
change the character and

or

to move forward/back a position. Then
press OK button to save the name.
Auto Adjust
Force the display to reacquire and lock to the input signal (VGA source only).
This is useful when the signal quality is marginal.
Options: No, Yes; Default: No
Note: This feature does not continually reacquire the signal.
VGA Position
Adjust the position of the image (VGA source only). Press

or

to select the
desired level, and then press OK.
Range: 0~100; Default: 50