AVOCOR AVF-7510, Руководство по установке и эксплуатации

Страница: 28 / 87

28
Mounting the Display
You can mount the display on a wall.
If you do decide to wall-mount the display, ensure that the wall-mount bracket is installed according to the
instructions included with it. The wall must be capable of supporting a redundant weight factor three (3) times
the weight of the display, or be reinforced.
We recommend that this be done by a custom installation specialist.
NOTE Use only the approved wall-mount kit designed for your display.
Connections to the Display
Proceed as follows to connect the display to your video sources, external controller(s) – if present – and AC
power.
When connecting your equipment:

Turn off all equipment before making any connections.

Use the correct signal cables for each source.

For best performance and to minimise cable clutter, use high-quality cables that are only as long as
necessary to connect two devices. (Don't use a 7m cable when a 1.8m cable will suffice.)

Ensure that the cables are securely connected. Tighten the thumbscrews on connectors that have them.