Avocent Cyclades ACS 6000 Скачать руководство пользователя страница 78 | Manualshive

Страница: 78 / 90

Avocent Cyclades ACS 6000 Скачать руководство пользователя страница 78

66

Cyclades ACS 6000 Advanced Console Server Installation/Administration/User Guide

7.

Click the

Select PDU

radio button and select a PDU from the Connected PDUs menu.

8.

Enter the outlets in the Outlet field.

9.

(Optional) Click the

Custom

radio button, enter PDU name in the PDU ID field and enter the

outlets in the Outlet field. When a PDU with the specified name is connected and the port is
enabled and configured, the outlet group can manage the specified outlets on that PDU.

To upgrade firmware on a Cyclades PDU:

1.

Log into the Web Manager as a user who is authorized to manage power.

2.

Select

Power Management

-

Settings

. The PDU Devices window appears.

3.

Click the name of the PDU to be upgraded. The Overview screen appears.

4.

If a more-recent firmware version is available for the Cyclades PM PDU at http://
www.avocent.com/web/en.nsf/Content/Cyclades_Download-PM, download the firmware onto
a local FTP server on the same subnet as the console server.

5.

Click

Upgrade firmware

. The Upgrade PM Firmware screen appears.

6.

Enter the name of the FTP server, the username, password and path to the firmware file.

7.

Click

Download

.

8.

After the download completes, verify the new version. If it is correct, click

Upgrade Now

to

upgrade the firmware.

9.

When the upgrade is done and the screen with the result of the operation appears, click

Finish

.

To upgrade software on a non-Cyclades PDU:

Avocent SPC power devices are not user upgradable. For Server Technology PDUs, upgrades must
be done through a network port. Contact Server Technology support to check if new software is
available and to obtain information on how to upgrade the device.

Monitoring

When you click

Monitoring,

a variety of network and console port information is available for

viewing. The screens are only for viewing and have no interactivity with the user. The following
table shows the types of information available.

Table 4.6: Monitoring Screens

Screen Name

Definition

Network - Devices

Shows Ethernet ports and PC card Device Name, Status (enabled/disabled),
IPv4 Address, IPv4 Mask and IPv6 Address.

Network - IPv4 Routing Table

Shows Destination, Gateway, Genmask, Flags, Metric, Ref, Use and lface.

Network - IPv6 Routing Table

Shows Destination, NextHop, Flags, Metric, Ref, Use and lface.

Serial Status

Shows Device Name, Connection Name, Profile, DTR, DCD, RTS, CTS and
CAS Sessions.

«
...
76
77
78
79
80
...
»

Содержание Cyclades ACS 6000



























































































Отзывы:

Нет отзывов