Avocent Cyclades ACS 6000, Инструкция по установке/администрированию/использованию, Страница: 40 / 90

28
Cyclades ACS 6000 Advanced Console Server Installation/Administration/User Guide
To configure the temperature sensors:
1. Click Appliance Settings - Global Settings - Sensors . The Sensors window will be displayed.
2. In the Maximum Temperature field, enter the temperature in degrees Celsius that, if exceeded,
will generate an event notification.
3. In the Maximum Temperature Threshold field, enter the temperature threshold in degrees
Celsius below the maximum temperature.
NOTE: When this threshold is reached, the sensor will generate an event notification that the console server has
returned to normal operating temperature. This is also true for setting the Minimum Temperature Threshold.
4. In the Minimum Temperature field, enter the temperature in degrees Celsius that, if the console
server’s temperature falls below, will generate an event notification.
5. In the Minimum Temperature Threshold field, enter the temperature threshold in degrees
Celsius above the minimum temperature.
6. Click Save .
Data buffering
To configure data buffer storage:
1. Select Appliance Settings - Global Settings - Data Buffering . The Data Buffering screen
appears.
2. Enter the segment size in kilobytes and spare segments in the Local Data Buffering Settings
section.
3. In the NFS Data Buffering Settings section, enter the following information: NFS Server, NFS
Path, Segment Size (Kbytes) and Spare Segments.
NOTE: RPC service must be enabled in the Security Profile screen before configuring NFS Data Buffering
Settings. NFS does not support IPv6.
4. Configure data buffer storage on a syslog server in the Syslog Data Buffering Settings section;
select a facility number from the drop-down menu: Log Local 0, Log Local 1, Log Local 2,
Log Local 3, Log Local 4 or Log Local 5.
5. Click Save .
Network Configuration
You can display and configure the network options for IPv6, devices, bonding, IPv4 and IPv6 static
routes, DSN and hosts.
IPv6 options
To configure IPv6:
1. Select Appliance Settings - Network - IPv6 . The IPv6 screen appears.
2. Click Enable IPv6 to configure the console server for IPv6 protocol operation.