Avocent AV Works, Инструкция по установке и эксплуатации

Страница: 68 / 144

56 AVWorks Installer/User Guide
10. Enable or disable the Reset to Default checkbox to reset the login script to its default content.
The default value is disabled.
11. Click OK to exit the dialog box and save any changes.
-or-
Click
Cancel to exit the dialog box without saving any changes.
To enable or disable debug mode for login scripts:
You may enable or disable debug mode for login scripts in the Explorer options or in a
device’s properties.
1. To access the enable/disable debug mode option, select
Tools - Options from the Explorer menu.
-or-
To access the enable/disable debug mode property:
a.
Select an appliance or device in the Unit list.
b. Select View - Properties from the Explorer menu.
-or-
Click the
Properties task button.
-or-
Right-click on the unit. Select
Properties from the pop-up menu. The Properties dialog
box appears.
2. Click the Telnet tab.
3. Enable/disable the Open Window before login checkbox. When enabled, the Serial Console
Viewer Telnet window will open before login is attempted. When disabled, the Telnet window
will open only after a successful login.
4. Click OK to save the new setting.
-or-
Click
Cancel to exit without saving the new setting.
Table 5.2: CCM Appliance Default Values
Field Default Value
Initial Character None
First Expect Username:
First Send %U
Second Expect Password:
Second Send %W
Success String Authentication Complete
Failure String Invalid Login