Avocent AV Works, Инструкция по установке и эксплуатации

Страница: 56 / 144

44 AVWorks Installer/User Guide
You may disable a device thumbnail from the scan sequence. The thumbnail image remains, but it
is not updated until it is once again enabled.
Scan mode and credential caching
The Thumbnail Viewer is often used in non-interactive read-only environments. As such, disabling
credential caching makes the Thumbnail Viewer a less effective feature. If credential caching is
disabled, during its first pass through the scan list, the Thumbnail Viewer will prompt for a
username and password. If those credentials are valid, the Thumbnail Viewer will cache them
locally and attempt to use them for other devices during that session.
To access scan mode:
1. Select the Servers, Sites or Folders tab in the Explorer window.
2. Select two or more devices in the Unit list by pressing the
Shift
or
Control
key. The Scan
Mode task button appears.
3. Click the Scan Mode task button. The Thumbnail Viewer window appears.
To set scan preferences:
1. Select Options - Preferences from the Thumbnail Viewer menu. The Preferences dialog
box appears.
2. In the View Time Per Server field, enter the time each thumbnail will be active during the scan,
in the range 5-60 seconds.
3. In the Time Between Servers field, enter the time the scan will stop between each device, in the
range 5-600 seconds.
4. Click OK .
To pause or restart a scan sequence:
Select Options - Pause Scan from the Thumbnail Viewer menu. The scan sequence will pause at
the current thumbnail if the Thumbnail Viewer has a scan in progress or will restart the scan if
currently paused.
To change the thumbnail size:
Select Options - Thumbnail Size from the Thumbnail Viewer menu. Choose the desired thumbnail
size from the cascade menu.
To disable a device thumbnail in the scan sequence:
Select a device thumbnail. Select Thumbnail - <device name> - Disable from the Thumbnail
Viewer menu.
-or-
Right-click on a device thumbnail and select
Disable from the pop-up menu.
Updating of that thumbnail image will stop until it is enabled.