Avocent AV Works, Инструкция по установке и эксплуатации

Страница: 34 / 144

22 AVWorks Installer/User Guide
b. Select View - Properties from the Explorer menu.
-or-
Click the
Properties task button.
-or-
Right-click on the unit. Select
Properties from the pop-up menu.
The Properties dialog box appears.
c. Enable the Launch user-specified application checkbox and enter the directory path, name
and any command line arguments. For commands that do not provide a GUI, enable the
Launch in command window checkbox.
To configure Telnet access directly to a device:
NOTE: This procedure applies to Serial Console Viewer or third party Telnet access directly to a device.
1. Select View - Properties from the Explorer menu.
-or-
Click the
Properties task button.
-or-
Right-click on the device. Select
Properties from the pop-up menu.
The Properties dialog box appears.
2. Click the Telnet tab.
3. Specify the device’s IP address and enable the Use Default checkbox. The port number
defaults to 23; you may specify another value.
4. Click OK to save the changes.
To access a device:
1. Click the Devices tab in the Explorer.
2. Double-click on a device in the Unit list.
-or-
Select a device, and then click the connection task button:
Connect Video if connected to an
AVR switch, Connect Serial if connected to a CCM appliance, Browse if a URL is configured
or Telnet if an IP address is configured. Only the appropriate button(s) for the selected device
will appear.
-or-
Right-click on the device. Select the connection entry from the pop-up menu:
Connect Video for
an AVR switch, Connect Serial for a CCM appliance, Browse if a URL is configured or Telnet
if an IP address is configured. Only the appropriate entry for the selected device will appear.
-or-
Select a device in the Unit list and press
Enter
.
If a device has more than one primary action (for example, connected to an AVR switch and a
CCM appliance), you are prompted to choose from the available access options (for example,
Connect Video or Connect Serial).