MSC SM2S-IMX8M User Manual
54 / 92
Figure 5-4: Module top side with MSC UART debug adapter
Serial Debug Console Output options
The Debug connector offers the same SER0_RX/TX signals which are also duplicated on the SMARC connector, pins P129/130 (there with 1.8V
level, while on Debug connector with 3.3V TTL level). See also section 4.12 .
So for accessing the U-Boot / Linux console, depending on availability and usage of the port on the target Carrier board, either connection via the
Carrier board + SMARC connector or via the Debug connector on the module can be chosen to the same effect.
MSC Debug Adapter
Order Part No. 40402
Debug UART Adapter for i.MX8-based
SMARC, Qseven and nanoRISC
modules, with 8-pin FFC cable to
connect COM module to 9-pin D-Sub
connector
Use top / top cables.
Содержание SMARC MSC SM2S-IMX8M
