AvMap G7 Farmnavigator, Руководство пользователя

Страница: 51 / 80

51
AvMap G7 Farmnavigator – User Manual
new A-B line;
-Locate the line on your current position, maintaining A-B direction;
-
Reuse A-B lines with an implement which has a different width: locate the implement at the
starting point, use the “Magnet” function to move the origin of A-B lines on that point.
To use “Magnet” function:
1. Tap “A-B”;
2. Tap “Magnet”;
Magnet
Move the A-B lines to the antenna position.
Table 4.7.a “ Magnet” function
3. A-B lines will be moved to the exact position of the tractor.
4.8 Move A-B line according a precise value, “Street” function
“Street” function allows you to move A-B line according to a precise metrical distance. The
repositioning of the A-B lines starts from the tractor current position.
This function is essential when you need to:
-Leave a precise distance between one A-B line and the other;
-
Create “ Streets” in sowing area, usually used for irrigation;
-Split the parcel into precise portions.
In order to use “Streets” function:
1. Tap “A-B”;
2. Tap on “Street” icon;
Streets
Move A-B lines few meters away from the antenna position. The maximum
allowed movement is equal to half the width of the implement.
Table 4.8.a ‘ Streets’ Functions
3. Set the metrical distance according to which the row will be moved;
NOTE: the distance will be calculated starting from the antenna position (which corresponds to the
position of the tractor);
4. Confirm to apply the movement.
4.9 Connect an external device to control sections
G7 Farmnavigator allows you to connect third-party external devices to make an automatic control
of the section. This feature can be used with implements such as:
-Weeding barrel
-Spreaders
-Planters
In the appendix, there is a list of supported devices.
The procedure to be performed for the correct configuration is as follows: