Call-back on No Response
FRITZ!X USB – 7 FRITZ!X USB Operation
65
7.10 Call-back on No Response
This function can be used when you dial an external number
and the party does not respond. Once the party can be
reached again and conducts a call from her or his phone,
this function recognizes when this conversation is ended.
Your telephone rings. When you pick up your handset, the
number of the desired party is automatically dialed again.
This feature is supported for both external and internal
connections.
Note that this feature must be enabled for your line by your
ISDN provider. Once the function has been enabled, you can
activate it using your telephone.
To activate this feature, proceed as follows:
The telephone network registers the next time the telephone
you called is used, and then signals you as soon as the
number is available.
M
You have just dialed a number and hear a ring tone.
5
If the call is not answered, dial the number “5”.
Q
Wait for the acknowledgment tone.
O
Hang up the handset.
N
Pick up the handset. The number of the remote party
is dialed automatically.
K
Your telephone rings.
N
Pick up the handset. The number of the remote party
is dialed automatically.
K
The telephone at the desired number rings.
F!XUSB-e.book Seite 65 Mittwoch, 8. November 2006 2:23 14
