Three-Party Conference Call
FRITZ!X USB – 7 FRITZ!X USB Operation
63
7.8 Three-Party Conference Call
FRITZ!X USB allows you to hold telephone conferences with
two other people at once. Two external and one internal
party, or two internal and one external party can conduct a
conference call with each other.
You can set up a three-party conference as follows:
N
Pick up the handset of your telephone.
M
Dial the external number of the first party. Talk.
R
Now press the Hold button.
M
To dial a second call, simply dial the desired
extension number or the outside line access “0”
followed by the desired external number. You can
now talk to the second subscriber while your first
call is on hold.
R3
Dial the sequence shown at left to begin a three-
party conference call.
D
Now all three participants can confer together. If
either of the other two parties hangs up, your
connection with the remaining participant remains
active.
O
You can end the three-party call by hanging up the
handset.
R2
You can also switch from the three-party call back
to the original two-party connection. To do so,
press the Hold button followed by “2”. This ends
the three-party conference. The first connection is
now active. The other external call is on hold. You
can alternate between the two connections by
dialing the same sequence again.
F!XUSB-e.book Seite 63 Mittwoch, 8. November 2006 2:23 14
