Using ISDN Services With FRITZ!
40
FRITZ!X USB – 5 FRITZ!: Internet and ISDN Software
5.4 Using ISDN Services With FRITZ!
ISDN integrates the entire range of telematics services, such
as telephone, telefax, data and video communication, in a
single digital telecommunications network. FRITZ! turns your
computer into a convenient communications hub which
provides all these services.
You can also use third-party communications applications
based on CAPI 2.0.
Multiple Subscriber Numbers for the FRITZ! Modules
To receive fax and data calls with FRITZ!, it is not necessary to
assign distinct Multiple Subscriber Numbers (MSNs) to the
different modules, since FRITZ!fax answers calls with the
service indicator "voice", while FRITZ!data responds only to
calls with the service indicator "data".
FRITZ!fax and FRITZ!fon, on the other hand, all use the
"voice" indicator. If you want these modules to respond to
calls ment for them, you must assign distinct MSNs for call
acceptance to FRITZ!fax and FRITZ!fon, and to any telephones
or fax machines connected to analog extensions. Specify the
settings on the "ISDN" settings page of each FRITZ! module.
5.5 Into the Internet With AVM System
Drivers
Alternative to FRITZ!web, Internet connections can be
established using the AVM ISDN CAPI Port Driver. This
system driver is controlled via Dial-Up Networking. The
system driver from AVM allows you to use CAPI-based ISDN
applications alongside communications programs that do
not have built-in CAPI support.
During the FRITZ! installation you can specify whether you
want to add FRITZ!web to the “Startup” group. If so, then
FRITZ!web acts as your computer’s default connection to the
Internet as soon as you start your computer. If you want to
use Dial-Up Networking to connect to the Internet, you must
exit FRITZ!web or remove it from the “Startup” group.
F!XUSB-e.book Seite 40 Mittwoch, 8. November 2006 2:23 14
