Removing Software Components in Windows 2000
FRITZ!X USB – 4 Removing Software Components
35
4.3 Removing Software Components in
Windows 2000
Proceed as follows to remove the FRITZ!X USB driver software
in Windows 2000:
1.
Open the system properties of Windows by clicking
through “Start / Settings / Control Panel / System” and
select the "Device Manager" button on the “Hardware”
settings page.
2.
In the “Network adapters” section of the Device
Manager, select the “AVM FRITZ!X USB” entry.
3.
Select the “Uninstall” command in the “Action” menu.
4.
Confirm the uninstallation in the following security
prompt. FRITZ!X USB will be removed.
This completes uninstallation of the driver software of
FRITZ!X USB in Windows 2000.
Proceed as follows to remove the software components in
Windows 2000:
1.
Click the “Add or Remove Programs” icon in the “Start /
Control Panel”.
2.
Make sure that the “Change or Remove Programs”
button is selected in the column to the left.
3.
The components of FRITZ!X USB are found in the list of
installed software. Their names are:
–
AVM FRITZ!
–
AVM FRITZ!X
–
AVM ISDN CAPI Port
4.
Select the software component you want to remove.
5.
Click the “Change/Remove” button.
All of the selected component's files and settings are
deleted from your computer.
6.
Repeat this process to remove other software
components of FRITZ!X USB.
This completes the uninstallation of the selected components.
F!XUSB-e.book Seite 35 Mittwoch, 8. November 2006 2:23 14
