System Requirements
FRITZ!X USB – 1 Introduction
11
1.2 System Requirements
FRITZ!X USB is designed for use with point-to-multipoint
ISDN lines using the Euro-ISDN signaling protocol DSS1.
Connection to other line types is contrary to the intended use
of the product and may cause malfunctions. Trouble-free
operation of the product is not guaranteed in such cases.
The following minimum PC configuration is required for
installation of the FRITZ! communications software and for
Internet access:
z
IBM or 100%-compatible computer with a USB port
z
Pentium processor with at least 32 MB main memory
and memory on hard disk
z
CD-ROM drive
z
Operating system Microsoft Windows XP, Windows Me,
Windows 2000 Professional, Windows 98
1.3 The PBX FRITZ!X USB
The FRITZ!X USB PBX and its accessories are introduced
below.
Connectors
The following illustration shows the back view of
FRITZ!X USB. The back panel has a row of connectors,
including jacks for the power cord, for the analog telephone
extension lines, for the connection to the PC and for the ISDN
line.
FRITZ!X USB Connector Panel
F!XUSB-e.book Seite 11 Mittwoch, 8. November 2006 2:23 14
