One-time Explicit (External) Call Transfer
FRITZ!Box
124
One-time Explicit (External) Call Transfer
Explicit Call Transfer (ECT) is an ISDN feature that must be
enabled by your ISDN provider and thus usually is subject
to extra charges. If ECT has not been enabled on your line,
you can program the PBX to initiate a one-time explicit call
transfer before connecting to two parties. When you end
the connection, the other two parties will be connected to
each other. Proceed as follows:
With this type of external transfer, both parties are connect-
ed to each other over your PBX. This means that both B
channels on your ISDN line remain busy with this connec-
tion as long as the parties are connected to each other.
N
Pick up the handset.
s32r
Dial the sequence shown at left. You hear the ex-
ternal dial tone.
M
Dial the external number of the first party. Talk.
R
Press the Hold button.
M
Dial the number for your second external call.
You can now conduct a second conversation
while your first call is on hold.
To clear your connections while allowing the ex-
ternal parties to continue the call, connect the
parties with each other.
R4
Dial the sequence shown at left. The connection
on hold and the active connection are connect-
ed with each other. The external parties contin-
ue the call while you clear the connection.
O
Hang up the handset.
F!BoxFonWLAN-7170v2-e.book Seite 124 Freitag, 23. November 2007 3:41 15
