FRITZ!Box
121
Call Waiting
Enabling Connected Line Identification Presentation
Permanently
To permanently enable transmission of the connected
line’s number (COLP), proceed as follows:
Call Waiting
Enable the “Call Waiting” feature to be notified during a call
if a second caller is dialing your line. An acoustic signal in
your telephone handset notifies you that a second call is
waiting. You can accept the connection with the new caller
within 30 seconds. If you ignore the signal, the waiting call
is rejected after 30 seconds.
For instructions on how to turn the “Call Waiting” function
on and off, see the section “Call Waiting Option” on
page 105.
N
Pick up the handset.
r53
Ext.
s0s
Dial the sequence shown at left
to enable transmission of the
connected line number. Type in
the number of the extension in
the “Ext.” field.
r91ss
Save your settings if desired by
dialing the sequence shown at
left.
O
Hang up the handset.
R2
To accept a waiting call, dial the sequence
shown at left. Your original call is now on hold.
R1
To return to your original connection, dial the se-
quence shown at left. You can also accept the
waiting call by hanging up your existing connec-
tion, i.e., by hanging up the handset. In this case
the phone rings as soon as you have hung up.
Pick up the handset again to accept the waiting
call.
R0
To reject a waiting call, dial the sequence shown
at left.
F!BoxFonWLAN-7170v2-e.book Seite 121 Freitag, 23. November 2007 3:41 15
