![AVM FRITZ!Box 6360 Cable Скачать руководство пользователя страница 126](http://html.mh-extra.com/html/avm/fritz-box-6360-cable/fritz-box-6360-cable_installation-configuration-and-operation_3032858126.webp)
126
DHCP Server
3.5
DHCP Server
The FRITZ!Box is equipped with its own DHCP server. The
DHCP server is enabled by default in the factory settings. The
following range of IP addresses is reserved for the DHCP serv-
er in the factory settings:
192.168.178.20 - 192.168.178.200
This IP address can be changed as needed.
Every time the operating system on a computer connected
with FRITZ!Box is started, the DHCP server assigns it an IP ad-
dress from the IP address range of the DHCP server.
Assigning the IP addresses via the DHCP server ensures that
all of the computers connected with the FRITZ!Box are located
in the same IP network.
Fixed IP Addresses when the DHCP Server Is Enabled
If you would like to configure fixed IP addresses on individual
computers connected with the FRITZ!Box despite the enabled
DHCP server, please note the following:
•
The IP addresses must be from the IP network of the
FRITZ!Box.
•
The IP addresses may not come from the address range
of the DHCP server.
•
Each IP address can be assigned only once.
Only one DHCP server may be active within any network.
The computers can receive their IP addresses from the DHCP
server only if the setting “Obtain an IP address automatical-
ly” is enabled in the their IP settings. For more information,
see the section
Obtaining an IP Address Automatically from
.