AVM FRITZ!Box 6320 Cable Скачать руководство пользователя страница 80 | Manualshive

Страница: 80 / 145

AVM FRITZ!Box 6320 Cable Скачать руководство пользователя страница 80

80

Setting Up Night Service for WLAN

12.5

Setting Up Night Service for WLAN

In the FRITZ!Box you can set up night service for the WLAN ra-
dio network. Then the FRITZ!Box switches to hibernation at
specified times and turns off the radio network. This has the
following advantages:

•

reduced power consumption when idle

•

Time-controlled Internet access: With night service you
can ensure that your children are only allowed to surf the
web until a certain time of day.

Switching Night Service for WLAN On and Off

1.

Open the FRITZ!Box user interface (see

).

2.

Select the “System / Night Service” menu.

3.

Enable the “Use schedule for WLAN radio network” op-
tion.

4.

Enable or disable the option “The radio network cannot
be switched off until no more WLAN devices are active. ”.

Option enabled: The radio network remains switched on
until all wireless connections between the FRITZ!Box and
other WLAN devices have been ended.

Option is disabled: The radio network is switched off im-
mediately at the start of the specified period.

5.

Define the days and times at which the FRITZ!Box WLAN
radio network should be switched off.

6.

Save your settings by clicking “Apply”.

Night service for WLAN is now enabled. To disable night ser-
vice, remove the checkmark in front of “Use schedule for
WLAN radio network” and click “Apply”.

Switching on WLAN during Night Service

The WLAN radio network of the FRITZ!Box can be switched
back on at any time during night service:

Press the WLAN button on the FRITZ!Box or switch on the
WLAN radio network using a connected telephone (see
page

FBoxCable-6320-2-e.fm Seite 80 Freitag, 27. Mai 2011 3:21 15

«
...
78
79
80
81
82
...
»

Содержание FRITZ!Box 6320 Cable


















































































































































Отзывы:

Нет отзывов