AvL Technologies AAQ IntelliTrack Module страница 22 Скачать руководство пользователя

Страница: 22 / 27

IntelliTrack Module

Operations Guide

AvL Technologies

| Proprietary – Content is Subject to Change without Notice

pg. 21

IntelliTrack Step Track Peak
Power El Offset

The elevation offset position of the current peak power detected by
StepTrack. (from the model position with any previous offsets added)

IntelliTrack Step Track State

The current state that StepTrack is running

IntelliTrack Target Azimuth

The azimuth position of the current IntelliTrack target. (IntelliTrack only,
no offsets applied)

IntelliTrack Target Elevation

The elevation position of the current IntelliTrack target. (IntelliTrack
only, no offsets applied)

4.3. Module Windows

4.3.1. Device Window

A Device Window is not needed for monitoring operation and is not included in the software.

4.3.2. Device Control Window

A Device Control Window is not needed for monitoring operation and is not included in the software.

Issues and troubleshooting

Issue

Description

Corrective Action

Target profile not set
to run IntelliTrack

IntelliTrack State

sensor

output shows “

Idle

” after

Acquire or Track commands
are issued and the system
does not track

Check that IntelliTrack is set as the

Tracking

Method

and

Run Track After Acquire

is set

to “Yes” in the target configuration

Target profile not set
to skip standard
acquisition process

System attempts to acquire
and peak at nominal
geosynchronous location
before running IntelliTrack
scans

Check that the

Skip Acquire Sat State

target configuration item is set to “Yes”

Содержание AAQ IntelliTrack Module




























Результаты поиска

Содержание AAQ IntelliTrack Module

Отзывы:

Похожие инструкции для AAQ IntelliTrack Module

Бренды по названию

Популярные бренды

AvL Technologies AAQ IntelliTrack Module, Руководство по установке и эксплуатации

Результаты поиска

Содержание AAQ IntelliTrack Module

Отзывы:

Похожие инструкции для AAQ IntelliTrack Module

Бренды по названию

Популярные бренды