AAQ Controller Interface Panel (CIP)
5
Figure 59 - NAT Mapping ...................................................................................................................................................... 35
Figure 60 - Network Example ................................................................................................................................................ 36
Figure 61 - Example Settings ................................................................................................................................................. 37
Figure 62 - Router Conversion Complete .............................................................................................................................. 37
Figure 63 - Verify Switch/ Router Configuration ................................................................................................................... 38
Figure 64 - Display Update .................................................................................................................................................... 39
Figure 65 - POE Update ......................................................................................................................................................... 40
1.
Introduction
The AAQ Controller Interface Panel (CIP) is a 1 rack unit (1 RU) size hardware peripheral used for connections and power
to the AAQ Controller. Primary functions of the AAQ Controller are available via the CIP front panel. This unit is also the
interface for any LAN/WAN requirements. The following section will detail the basic hardware and peripheral
requirements for set up, connectivity and provide a visual overview of the AAQ CIP.
1.1.
AAQ CIP P/N Selection
The following table describes the two specific AAQ Controller Interface Panel configurations available for purchase.
For additional information please contact AvL Technologies Sales Department.
Part Number
Description
701-320-301
Power Supply Kit. (1 RU) 250W control interface and power supply.
701-320-302
Power Supply Kit. (1 RU) 500W control interface and power supply.
1.2.
AAQ Required and Optional Installation Equipment
The following table lists the minimum and optional equipment needed for installation of the AAQ Controller Interface
Panel. Some items can be customized given specific customer needs.
Name
Count
Description
VAC Power Cable
1
AC Power Cable
VDC Power Cable*
1
DC Power Cable (to Antenna)
Ethernet COM Cable*
1
Network Connection to Antenna
Ethernet COM Cable*
1(+)
Network Connection to additional devices
CIP Handheld†
1
Remote Control Interface (wired)
† Optional
* Customizable
