AAQ Controller Interface Panel (CIP)
18
3.4.13.
Limit Status Screen
Figure 24 - CIP Limit Status Screen
The Limit Status Screen shows the current state of various limit conditions (0=Normal; 1=At Limit). To return to the
Alarms Prompt Screen, press either the stop or go button. From the Alarms Prompt Screen,
↓
will navigate the
user to the Active Profile Screen.
√↓
3.4.14.
Active Profile Screen
Figure 25 - Active Profile Screen
The Active Profile Screen displays the active profile name, and the signal source and polarity for it. The down arrow
will navigate to the Change Profile Prompt Screen.
↓
3.4.15.
Change Profile Prompt Screen
Figure 26 - CIP Change Profile Prompt Screen
From the Change Profile Prompt Screen, the Go button will display the list of profiles to choose from in the Select
Profile Screen. If this system has been configured to support a moveable feed the down arrow will navigate to the
Move Feed Slide Prompt Screen; otherwise, the down arrow will navigate to the Jog Prompt Screen.
√